Loading...
DMT Device Enabler Danish Myo Technology
Use this command to install DMT Device Enabler:
winget install --id=DMT.DMTDeviceEnabler -e A freely available software addition to LabChart provided by Danish Myo Technology. It allows a selected range of wire myograph, muscle strip myograph, and tissue organ bath systems to stream data into LabChart. The following systems, used for studies in smooth and striated muscle, are supported: - 320A Single Wire Myograph (firmware 2.0.5 or later) - 360CW Confocal Wire Myograph (firmware 2.0.5 or later) - 420A Dual Wire Myograph (firmware 2.0.5 or later) - 520A Auto Dual Wire Myograph (firmware 2.0.5 or later) - 620M Multi Chamber Myograph (firmware 03.20 or later) - 720MO Tissue Bath System (firmware 03.20 or later) - 630MA Auto Multi Wire Myograph (firmware TBA) - 750TOBS Tissue Organ Bath (firmware Mar. 2017 or newer) - 751mT Tissue Organ Bath (firmware Feb. 2017 or newer) - 820MS Muscle Strip System (firmware TBA) The firmware version is displayed on the Touchscreen at start-up. The DMT Device Enabler allows: - Automatic recognition of supported devices by LabChart - Use of multiple devices simultaneously - Correct units and ranges in LabChart channels - Simultaneous recording of data into LabChart alongside a PowerLab
DMT Device Enabler is a freely available software addition to LabChart designed to enable seamless data streaming from select wire myograph, muscle strip myograph, and tissue organ bath systems into LabChart. This tool facilitates advanced research capabilities for studies involving smooth and striated muscle mechanics.
Key Features:
- Automatic recognition of supported devices by LabChart
- Simultaneous use of multiple devices
- Correct units and channel ranges configured in LabChart
- Concurrent data recording with other systems
Audience & Benefit:
Ideal for researchers, lab technicians, and scientists working with smooth or striated muscle studies. The DMT Device Enabler streamlines workflows by integrating hardware compatibility directly into LabChart, reducing setup time and enhancing research efficiency.
The software supports a range of systems including the 320A Single Wire Myograph, 360CW Confocal Wire Myograph, 420A Dual Wire Myograph, 520A Auto Dual Wire Myograph, 620M Multi Chamber Myograph, and more. Each system requires specific firmware versions for optimal performance.
DMT Device Enabler is compatible with LabChart version 8.0 or later and can be installed via winget.