Awesome Programs/Packages

The goal is to reveal the hidden pattern in the board by coloring or leaving blank the cells in a grid according to numbers given at the side of the grid. This is a single player game.

PawnIO is a scriptable universal kernel driver, allowing hardware access to a wide variety of programs.

This extension allows LabChart for Windows data to be played as sound either in real time or after recording. Common examples where this might be useful are the play back of heart sounds, animal sounds, voice, or action potential spikes.

This extension allows you to monitor user-defined events in real time using different criteria and to perform variety of actions on an event occurring.

Cardiac Axis is a LabChart extension that automates the calculation of frontal plane electrocardiograms and the vectorcardiogram. It can also animate the instantaneous cardiac vector display.

Export QuickTime allows you to save LabChart data files as QuickTime movies. The QuickTime movies can be viewed on any QuickTime supported platform or embedded in other media that supports QuickTime movies.

This extension allows you to control the digital outputs on a /30 and /35 series PowerLab and the analog outputs on /20, /25, /30 and /35 series PowerLabs. Fast Response Output responds to the input signal directly from the PowerLab and the resultant output is generated in less than 1 millisecond.

The LabChart 8 Glucose Calibration extension provides the ability to calibrate the new HD-XG implantable glucose telemeter from DSI in conjunction with the ADInstruments Biopotential Telemetry System.

This extension allows the user to perform linear and non-linear calibration on transducers, sensors, pH electrodes and other equipment.

The Non-Invasive Cardiac Output Add-On enables real-time estimation of Cardiac-Output from an NIBP (Non-Invasive Blood Pressure) channel. It implements published and widely accepted algorithms and can estimate the following parameters: CO (Cardiac Output), SV (Stroke Volume) and TPR (Total Peripheral Resistance). It requires an ADInstruments or FMS NIBP device (such as the INL382 Human NIBP Nano System).

The Scheduler Extension for LabChart allows the scheduling of recordings across one or more LabChart data files. A schedule may consist of an initial delay, followed by repeated recording cycles, until a specified end time. Scheduler can also be used with external scheduling devices, such as the TR Scheduler Pod.

This extension derives a number of respiratory parameters based on flow and volume, including VE, VT, frequency, PIF, PEF, FVC, FEV1. This extension also generates a flow-volume plot and spirometry reports.

This extension makes use of the gain-telegraph output from an electrophysiological amplifier to continue to display data at the correct scale after a gain change.

The Blood FlowMeter Device Enabler is a software addition to LabChart, which supports the Blood FlowMeter hardware, which is manufactured by Oxford Optronix Ltd. for distribution by ADInstruments and for use with ADInstruments LabChart software. It allows measurements of blood cell perfusion levels in the microcirculatory beds of skin and other tissues.

The ADInstruments CODA Monitor Device Enabler is a software enabler for LabChart, allowing an ADInstruments CODA Monitor to stream data into LabChart. A CODA Monitor utilizes Volume Pressure Recording (VPR) sensor technology to measure the tail blood pressure from awake or anesthetized mice or rats, and provide blood pressure parameters including: - systolic blood pressure - diastolic blood pressure - mean blood pressure - heart rate - tail blood volume - tail blood flow

The Equivital LifeMonitor Device Enabler allows streaming data from Equivital LifeMonitors directly into LabChart. Equivital LifeMonitors can continuously record ECG, respiratory rate, core temperature as well as other measurements wirelessly.

The Human NIBP Device Enabler allows the Human NIBP Controller and Nano Core Systems to stream non-invasive blood pressure data directly into LabChart. The Human NIBP Systems are based on Finapres modules and allow switching between two fingers, permitting prolonged blood pressure measurements with minimal discomfort.

The Kent Device Enabler is a software addition to LabChart, allowing Kent Scientific devices to stream data into LabChart. The following devices, which are used for monitoring physiological signals from mice and rats, are supported: - PhysioSuite (including MouseSTAT, MouseVent, RightTemp, CapnoScan) - SomnoSuite The Kent Device Enabler allows: - Automatic recognition of Kent devices by LabChart - Correct units and ranges in LabChart channels - Simultaneous recording of data into LabChart alongside a PowerLab

The Oxford Optronix Device Enabler is a software addition to LabChart that allows a range of tissue monitors manufactured by Oxford Optronix Ltd. to stream data into LabChart. The following devices, used for monitoring of fundamental parameters affecting tissue vitality, are supported: - Dissolved Oxygen (pO2) monitors - OxyLite, OxyLite Pro, and OxyLite Pro XL - Blood Flow monitors - OxyFlo, OxyFlo Pro, and OxyFlo Pro XL The Oxford Optronix Device Enabler allows: - Automatic recognition of supported devices by LabChart - Use of multiple devices simultaneously - Simultaneous recording of data into LabChart alongside a PowerLab The Device Enabler includes settings files, available from LabChart's Welcome Center, which apply default units conversion and channel settings.

The Physiotel Device Enabler allows the DSI MX2 2.0 System and supported PhysioTel receivers to stream data directly into LabChart. The DSI Matrix 2.0 System for Physiotel and HD Implants is manufactured by Data Sciences International.

The Playback File Add-On allows streaming in data from any supported LabChart file (including imported data formats such as EDF and WAV), as if the data were coming live from an attached device. This allows you to mimic real-life recording situations using previously recorded data.

The Trigno Wireless System Device Enabler allows the Trigno Wireless System to stream data directly into LabChart. The Trigno Wireless device enabler and compatible Trigno Server software are available on the ADInstruments website. The Trigno Wireless System is manufactured by Delsys Inc. and allows the acquisition of EMG and related signals from subjects for biofeedback purposes, and is intended for relaxation training and muscle re-education.

The Wii Balance Board Device Enabler for LabChart facilitates communication between a Nintendo Wii Balance Board and LabChart over a wireless Bluetooth connection. Data from four load sensors within the board can be streamed into LabChart with each sensor's data mapped to a separate LabChart channel. Combining channel data in LabChart allows for measurements such as a person's weight or center of balance.

The Blood Pressure Module adds functionality to LabChart to identify and analyze various parameters of human and animal ventricular and arterial pressure recordings. Analysis can be performed in both real time or after recording and includes a Classifier feature for detection and exclusion of atypical waveforms.